Silikal-MMA-floor-coatings

Hygienic, fast & safe

Benefits

Floor coatings with reactive resins from Silikal

Hygienic cleanliness thanks to Silikal floor coating

Hygienic

As jointless continuous surfaces, Silikal-MMA-floor-coatings offer the best conditions for absolute cleanliness: no niches that allow fungi and bacteria to multiply, no sanding out or holes that allow moisture and dirt to penetrate. Transitions to the wall can be executed in bevel or cove.

Hygienic cleanliness thanks to Silikal floor coating

Hygienic

As jointless continuous surfaces, Silikal MMA floor coatings offer the best conditions for absolute cleanliness: no niches that allow fungi and bacteria to multiply, no sanding out or holes that allow moisture and dirt to penetrate. Transitions to the wall can be made by coving.

Fast curing of floor coating on Silikal reactive resins
Fast

1 hour after installation, a Silikal floor is fully loadable again, often without any interruption to operations, even at very low temperatures of up to -25 °C.

Silikal floor coating offer the highest safety standards
Safe

Depending on the requirements of the floor surface, the coverings can be adjusted as desired from smooth to highly slip-resistant. For this purpose, different variants of our systems are tested and certified.

Facts about Silikal-MMA-floor-coating

N

Stronger

The compressive strength of Silikal floors can be flexibly adjusted; up to 105 Newtons per square millimetre are technically possible.

N

Aesthetic

Coloured flakes, coloured quartz and pigments from Silikal transform heavy-duty industrial floors based on reactive resins into individually designed and attractive surfaces.

N

Temperatures

MMA resins can be laid at very low temperatures and still be loaded very quickly. And that down to -25 °C.

N

Chemical resistance

Silikal floors are extremely resistant and show resistance to many acids, alkalis, greases, oils, most fuels and numerous other chemicals. 

Silikal systems - Floor coating

SILIKAL® Detail solution

SILIKAL® Kitchen System

SILIKAL® System B: Quartz SL

SILIKAL® System B: Quartz TA

SILIKAL® System C: Flakes

SILIKAL® System C: Uni Colour

SILIKAL® System D: Cold Room

SILIKAL® System D: Outdoor

Silikal systems - Floor coating

SILIKAL® Detail Solutions

SILIKAL® Kitchen System

SILIKAL® System B: Quartz SL

SILIKAL® System B: Quartz TA

SILIKAL® System C: Flakes

SILIKAL® System C: Uni Colour

SILIKAL® System D: Cold Room

SILIKAL® System D: Outdoor

Areas of application:

MMA floor coatings from Silikal

Design floors

Airport | Aircraft Hangar

Bakery

Healthcare

Retail | Supermarket

Fish and seafood industry

Meat industry

Beverage industry

Hotel

Kitchen

Expect more from your floor.

Food industry

Dairy industry

Cold room | freezer

Restaurant | Catering

Winery

Car Wash

Changing room | Laundry room

Ship

Agriculture | Animal Husbandry

Any questions?

Industry

Car Park | Garage | Workshop

Leisure

Areas of application:

MMA floor coatings from Silikal

Design floors

Airport | Aircraft Hangar

Bakery

Healthcare

Retail | Supermarket

Fish and seafood industry

Meat industry

Beverage industry

Hotel

Kitchen

Expect more from your floor.

Food industry

Dairy industry

Cold room | freezer

Restaurant | Catering

Winery

Car Wash

Changing room | Laundry room

Ship

Agriculture | Animal Husbandry

Any questions?

Industry

Car Park | Garage | Workshop

Leisure

Areas of application for Silikal-MMA-floor-coatings

For decades, Silikal MMA floor coatings have been used on many millions of square metres of floor surfaces. Scratch-, impact- and shock-resistant, they prove themselves worldwide in industry, trade, crafts and commerce against hard loads, abrasion, wear and corrosion.

Special emphasis should be placed on the basis of the floor coatings, which have already proven themselves for many years on industrial and utility floors. In contrast to normal floors, high loads cannot harm the Silikal MMA floor coatings. Common floor systems react "acidly" to extreme, everyday stress, which is reflected by sanding, cracks and holes. The cost-intensive consequences of this are regular and annoying repair work, production interruptions or even plant shutdowns. Thanks to Silikal reaction resins, these floor problems are easy to remedy.

The surface texture of Silikal MMA floor coatings ensures slip and slip resistance in warehouses, kitchens, production areas and the like. The slip resistance can be individually adapted to the area of application with different slip resistance levels. The Silikal MMA floor system is also unchallenged when it comes to speed. After one hour after laying the last layer, the surface is fully loadable.

The floor coating can be laid even in highly fluctuating and sub-zero temperatures of up to -25 °C and on concrete floors or screeds in the layer. The floor coatings offer the perfect solution for hygienic and germ-free cleanliness due to their jointless and pore-tight MMA surface. The tub-like design of the floor avoids niches and thus enables easy cleaning and disinfection of the floor. Even after many years, neither germs, bacteria, grease nor the regular use of cleaners leave traces on Silikal floor coatings.

The Silikal Standard floor coating systems have been certified by HACCP International and are therefore suitable for use in food processing companies. The successful inspection according to international guidelines is considered a seal of quality for safety standards such as hygiene and occupational safety and is renewed every two years.

Many millions of square meters of industrial and utility floors already rely on the highest quality of Silikal MMA floor coatings. Whether retail or car manufacturing, heavy industry, pharmaceuticals or handicrafts, food production, fish, dairy, meat and beverage industries, garages, workshops or car parks, wineries or catering kitchens, on ships or in agriculture - there is no area of application in which Silikal floors have not proven their worth. The entire range of floor coating systems meets the highest quality standards for utility and industrial floors.

Robust floor coating with reactive resins in the food industry

Jointless floor coatings in the food sector

Everyday life in the food industry is a tough test for all floors. Moisture, cold and heat accompany the work processes in the food industry and ensure the highest demands in terms of slip resistance. The ideal solution for all areas of the food industry: the jointless floor coating with Silikal MMA reaction resins.

Due to their extraordinary durability, even high mechanical or chemical stresses caused by salts or alkalis, for example, do not affect them. At the same time, the floor coatings can be cleaned quickly and easily and applied in a very short time. The Silikal standard floor coating systems have been certified by HACCP International and are therefore suitable for use in food processing companies. Silikal floor coatings offer the perfect solution for the special requirements of the food industry and for handling sensitive foodstuffs.

MMA floor coating for industrial floors in kitchens and hotels

Industrial floors in hotels and kitchens, quickly installed and extremely resilient for less downtime

Surfaces with Silikal reactive resins offer the perfect solution for the demanding daily business in hotels and gastronomy. In the centre of the action, where sometimes a glass falls, soup sloshes or boxes are pulled across the floor, Silikal floors are convincing.

The extremely hard-wearing and extraordinarily quick-to-install material is resistant to cleaning agents and remains unimpressed by rolling transport trolleys or high point loads. The seamless surface is easy to clean and thus creates the best conditions for hygiene and a neat appearance. Thanks to their resistance, slip resistance, attractive appearance and easy cleaning, Silikal floor coatings with reactive resins ensure smooth operations for caterers, restaurateurs and hoteliers.

MMA floor coating for industrial floors in kitchens and hotels

Industrial floors in hotels and kitchens, quickly installed and extremely resilient for less downtime

Surfaces with Silikal reactive resins offer the perfect solution for the demanding daily business in hotels and gastronomy. In the centre of the action, where sometimes a glass falls, soup sloshes or boxes are pulled across the floor, Silikal floors are convincing.

The extremely hard-wearing and extraordinarily quick-to-install material is resistant to cleaning agents and remains unimpressed by rolling transport trolleys or high point loads. The seamless surface is easy to clean and thus creates the best conditions for hygiene and a neat appearance. Thanks to their resistance, slip resistance, attractive appearance and easy cleaning, Silikal floor coatings with reactive resins ensure smooth operations for caterers, restaurateurs and hoteliers.

Seamless floor coating for hotels and restaurants Brochure

Seamless reactive resin floors from Silikal in hotels and restaurants

For decades, Silikal floor coatings have provided the perfect basis for the diverse and demanding challenges in hotels, restaurants and kitchens. In addition to high abrasion resistance, slip resistance and ease of care, Silikal floor coatings also impress with quick and easy cleaning, making hygienic cleanliness easier than ever before.

Seamless floor coating for hotels and restaurants Brochure

Seamless reactive resin floors from Silikal in hotels and restaurants

Seamless floor coating for hotels and restaurants Brochure

Seamless reactive resin floors from Silikal in hotels and restaurants

For decades, Silikal floor coatings have provided the perfect basis for the diverse and demanding challenges in hotels, restaurants and kitchens. In addition to high abrasion resistance, slip resistance and ease of care, Silikal floor coatings also impress with quick and easy cleaning, making hygienic cleanliness easier than ever before.

Seamless floor coating for hotels and restaurants Brochure

Seamless reactive resin floors from Silikal in hotels and restaurants

Slip resistance MMA floor coating for industrial floors

How resistant are Silikal-MMA-floor-coatings in the beverage industry?

Unimpressed by the everyday challenges of the beverage industry, Silikal offers a robust and flexible solution for floor coatings worldwide. Silikal floor coatings with reactive resins withstand all typical stresses, such as pushing and transporting beverage crates, without damage.

This means that the highest possible standard of hygiene can be maintained at all times and unnecessary repair work due to cracks or holes can be avoided. Because repairs always mean a breakdown, more costs and a lot of effort. If desired, the appearance of the floors can be adapted to individual wishes using colour quartz or flakes. The Silikal standard floor coating systems have been certified by HACCP International and are therefore suitable for use in food processing companies.

Reactive resins MMA floor coating in the dairy industry on polyurethane basis

Silikal floors in the dairy industry: Resistant to lactic acid

All over the world, companies in the dairy industry trust Silikal. Resistant to lactic acid as well as extreme loads, the floor coating from Silikal remains intact even after many years. The special coating system creates the best possible conditions for hygiene, appearance and safety in the dairy industry.

Thanks to the jointless and pore-tight floor coating and thorough cleaning, germ-free hygiene standards can be met without any problems. Another plus point is speed: Silikal's fast-curing synthetic resin floors can be installed in all production and storage areas, such as cold rooms or warehouses, in a very short time. Just one hour after laying the last layer, the floors are fully loadable.

The Silikal Standard floor coating systems have been certified by HACCP International and are therefore suitable for use in food processing companies.

Reactive resins MMA floor coating in the dairy industry on polyurethane basis

Silikal floors in the dairy industry: Resistant to lactic acid

All over the world, companies in the dairy industry trust Silikal. Resistant to lactic acid as well as extreme loads, the floor coating from Silikal remains intact even after many years. The special coating system creates the best possible conditions for hygiene, appearance and safety in the dairy industry. Thanks to the jointless and pore-tight floor coating and its thorough cleaning, germ-free hygiene standards can be maintained without any problems. Another plus point is speed: Silikal's fast-curing synthetic resin floors can be installed in all production and storage areas, such as cold rooms or warehouses, in a very short time. Just one hour after laying the last layer, the floors are fully loadable. The Silikal standard floor coating systems have been certified by HACCP International and are therefore suitable for use in food processing companies.

Robust floor coating for wineries

MMA floor coatings for wineries: Suitable for every wine tasting?

Silikal floor coatings have become indispensable in wineries, because they meet all the requirements of the wine industry: seamless, pore-tight, easy-care and non-slip. Intensive mechanical loads, such as daily forklift traffic, as well as fruit acids and other aggressive substances from spilled wine do not attack Silikal's reactive resins.

Due to the fast curing of one hour after laying the last layer, the floor can be realised without significant impairment of the operation. The interspersed coloured quartz not only provides strong slip resistance, but also an exciting, colourful individual look.

Especially in the wine industry, Silikal floors benefit from their ease of maintenance. The closed surfaces are also easy to keep clean thanks to seamless transitions through slanted or coved grooves. In order to guarantee the best possible hygiene standards, Silikal standard floor coating systems have been certified by HACCP International and are therefore suitable for use in food processing companies. In summary, Silikal floor coatings offer everything a good floor and wine needs. Because good wine needs good soil.

Silikal brochure for floor coating in the beverage industry

MMA floorings in the beverage industry

Silikal floor coatings based on methyl methacrylate (MMA) meet the versatile requirements of the beverage industry: non-slip, robust, easy to clean and a great possible cleanliness. The jointless and pore-tight surface can be cleaned quickly and easily and is resistant to most acids, alkalis, greases and other aggressive substances. The floor not only withstands all challenges, but is also ready for use and fully loadable in a very short time.

Silikal brochure for floor coating in the beverage industry

MMA floor coatings in the beverage industry

Silikal brochure for floor coating in the beverage industry

MMA floorings in the beverage industry

Silikal floor coatings based on methyl methacrylate (MMA) meet the versatile requirements of the beverage industry: non-slip, robust, easy to clean and a great possible cleanliness. The jointless and pore-tight surface can be cleaned quickly and easily and is resistant to most acids, alkalis, greases and other aggressive substances. The floor not only withstands all challenges, but is also ready for use and fully loadable in a very short time.

Silikal brochure for floor coating in the beverage industry

MMA floor coatings in the beverage industry

Jointless MMA floor coatings in bakeries thanks to reactive resins

Jointless floor coatings for bakeries: Quick to clean, even in corners and edges

The baking industry exposes its floor coverings to heavy loads every day, whether during production, in day-to-day business, during packaging or in storage and cold storage rooms. For Silikal floor coatings based on polyurethane, acrylates, unsaturated polyesters or epoxy resins, even these chemical, mechanical and thermal stresses are no challenge.

Thanks to the seamless floor surfaces and the easy cleaning and disinfection thereof, the high hygiene standards of the baking industry are permanently maintained. The visually appealing and robust floor also impresses with its strong slip resistance, which ensures safety in all areas as well as for employees and customers. That's why bakeries, confectioners and the baked goods industry worldwide have trusted Silikal's floor coatings for decades.

Highest hygiene standards thanks to Silikal floor coatings in the fish industry

Highest hygiene and safety requirements for floors in the fish and seafood industry

In the fish and seafood industry, sensitive products are worked with every day that require a clean and hygienic environment. Silikal offers the best solution for maintaining high hygiene conditions. This is because Silikal's MMA reaction resin-based floor coatings enable a closed and seamless surface that can be cleaned down to every corner without any problems - even with high-pressure cleaners.

Due to the lack of niches and pores that allow bacteria and fungi to multiply, Silikal surfaces offer the best basis for hygienic and germ-free cleanliness. The use of bevels and coving avoids transitions to the wall. Silikal surfaces are also resistant to moisture and cold as well as aggressive acids, alkalis and salts and ensure slip and slip resistance for employees and customers, even in damp or highly stressed conditions.

Silikal's fast-curing synthetic resin floors can be installed in a very short time and are fully loadable after just one hour after the last layer has been laid. The Silikal standard floor coating systems have been certified by HACCP International and are therefore suitable for use in food processing companies.

Highest hygiene standards thanks to Silikal floor coatings in the fish industry

Highest hygiene and safety requirements for floors in the fish and seafood industry

In the fish and seafood industry, sensitive products are worked with every day that require a clean and hygienic environment. Silikal offers the best solution for maintaining high hygiene conditions. This is because Silikal's MMA reaction resin-based floor coatings enable a closed and seamless surface that can be cleaned down to every corner without any problems - even with high-pressure cleaners.

Due to the lack of niches and pores that allow bacteria and fungi to multiply, Silikal surfaces offer the best basis for hygienic and germ-free cleanliness. The use of bevels and coving avoids transitions to the wall. Silikal surfaces are also resistant to moisture and cold as well as aggressive acids, alkalis and salts and ensure slip and slip resistance for employees and customers, even in damp or highly stressed conditions.

Silikal's fast-curing synthetic resin floors can be installed in a very short time and are fully loadable after just one hour after the last layer has been laid. The Silikal standard floor coating systems have been certified by HACCP International and are therefore suitable for use in food processing companies.

Hygienic cleanliness of floor coatings in the meat industry

Hygiene is a top priority in the meat industry

For all areas of use in the meat industry, there are the highest demands for hygiene and safety, for which Silikal offers the ideal solution. In butcher's shops and meat processing companies, Silikal floor coatings are the perfect basis for handling sensitive foodstuffs.

The jointless and pore-tight surfaces based on MMA can be formed tub-like and allow thorough cleaning down to the last detail. Thanks to the pore-tight coating, germs and bacteria as well as blood, grease and salts do not attack the surface even after many years. Even regular Areas of Application cleaning agents leave no traces on the floor coatings.

Silikal floor coatings can be applied quickly and easily. After just one hour after application, they are cured and fully loadable, even at temperatures as low as -25 °C. If the use of the room changes at a later date, the same applies, of course. The Silikal Standard floor coating systems have been certified by HACCP International and are therefore suitable for use in food processing companies.

Hygienic floor coatings for cold and damp conditions

Hygienic floors for cold rooms even in cold & damp conditions?

Cold rooms expose floors to permanently cold temperatures and stress. The floor coatings with Silikal reaction resins based on MMA offer the perfect solution for this. Even under heavy loads caused by pushing, pulling or driving transport trolleys and the like, Silikal floor coatings remain robust and stable. This ensures the continuous operation of the cold room, which is essential for hotels and restaurants.

In addition, the special, flexibilised Silikal resins make it possible to apply new coatings in cold rooms at normal temperatures as well as during subsequent cooling down to -25 °C, as well as repairs at sub-zero temperatures of up to -25 °C.

The Silikal standard floor coating systems have been certified by HACCP International and are therefore suitable for use in food processing companies. With the hygienic and robust floor coatings based on MMA, Silikal has been providing companies with the perfect basis for cold and damp conditions for 70 years.

Hygienic floor coatings for cold and damp conditions

Hygienic floors for cold rooms even in cold & damp conditions thanks to polyurethane and epoxy resins

Cold rooms expose floors to permanently cold temperatures and stress. The floor coatings with Silikal reaction resins based on MMA offer the perfect solution for this. Even under heavy loads caused by pushing, pulling or driving transport trolleys and the like, Silikal floor coatings remain robust and stable. This ensures the continuous operation of the cold room, which is essential for hotels and restaurants.

In addition, the special, flexibilised Silikal resins make it possible to apply new coatings in cold rooms at normal temperatures as well as during subsequent cooling down to -25 °C, as well as repairs at sub-zero temperatures of up to -25 °C.

The Silikal standard floor coating systems have been certified by HACCP International and are therefore suitable for use in food processing companies. With the hygienic and robust floor coatings based on MMA, Silikal has been providing companies with the perfect basis for cold and damp conditions for 70 years.

Brochure colour concepts for floor coatings

Silikal colour concepts thanks to reactive resins

Silikal's colour chips, colour quartz and pigments transform heavy-duty industrial and commercial floors into visually appealing floors that create a good working atmosphere and a harmonious overall appearance. The colour and appearance of the floor coatings can be adapted to individual requirements.

Brochure colour concepts for floor coatings

Silikal colour concepts thanks to reactive resins

Service and Downloads

Service and Downloads

Service and Downloads